Don’t you just hate it when your inner tube pops but you don’t know where the hole is? Well I’m going to show you the easiest way ever to identify the hole and patch it up. After this, you should be ready to go. Let’s Roll!

1. First off, remove inner tube from tire
2. Then get a bucket and fill it with water
3. After that, pump the inner tube up with as much air as possible
4. Submerge part of the tube in the water and squeeze
5. Pull out and submerge next part in
6. Keep repeating until you get to when tiny air bubbles appear in the water
7. The bubbles should be coming out of the hole if you are squeezing correctly
8. Now take out of water and fix that part
9. After patched up, put back in water to see if still leaking
10. If not, then success, you’re ready to go
11. If still leaking, continue to patch up

I hope this helps you a lot next time you get a flat.